Car and Truck Batteries

Get the right battery for your vehicle

Automotive batteries act as a power reserve for automobiles. These are lead-acid batteries, consisting of lead and lead dioxide plates that are surrounded by a solution of electrolytes made from sulfuric acid and water. Some of the older forms of these batteries required the addition of water to the solution in order to make up for water loss during use. These older batteries typically were not sealed inside plastic cases, but the newer batteries are sealed and are often referred to as being maintenance-free. To find the best battery for your automotive needs just ask our knowledgeable ETC Motorsports staff to assist you. You may also learn about the kinds of batteries that we carry, their different functions and the best uses for each

Different Types of Automotive Batteries

Lead-acid batteries for automotive use are made with slightly different construction techniques, depending on the application of the battery. The "flooded cell" type, indicating liquid electrolyte, is typically inexpensive and long-lasting, but requires more maintenance and can spill or leak. Some flooded batteries have removable caps that allow for the electrolyte to be tested and maintained. More costly alternatives to flooded batteries are "valve regulated lead acid" (VRLA) batteries, also called "sealed" batteries. The absorbed glass mat (AGM) type uses a glass mat separator, and a "gel cell" uses fine powder to absorb and immobilize the sulfuric acid electrolyte. These batteries are not serviceable: the cells are sealed so the degree of charge cannot be measured by hydrometer and the electrolyte cannot be replenished. They are typically termed "maintenance-free" by proponents, or "unable to be maintained" by skeptics.[3][4][5] Both types of sealed batteries may be used in vehicular applications where leakage or ventilation for vented gasses is a concern. However, this article deals with the classic, flooded-type of car battery.

The starting (cranking) or shallow cycle type is designed to deliver large bursts of power for a short time, as is needed to start an engine. Once the engine is started, the battery is recharged by the engine-driven charging system. Starting batteries are intended to have a low depth of discharge on each use. They are constructed of many thin plates with thin separators between the plates, and may have a higher specific gravity electrolyte to reduce internal resistance.

The deep cycle (or motive) type is designed to continuously provide power for long periods of time (for example in a trolling motor for a small boat, auxiliary power for a recreational vehicle, or traction power for a golf cart or other battery electric vehicle). They can also be used to store energy from a photovoltaic array or a small wind turbine. Deep-cycle batteries have fewer, thicker plates and are intended to have a greater depth of discharge on each cycle, but will not provide as high a current on heavy loads. The thicker plates survive a higher number of charge/discharge cycles. The specific energy is in the range of 30-40 watt-hours per kilogram.

Some cars use more exotic starter batteries, the 2010 Porsche 911 GT3 RS offers a lithium-ion battery as an option to save weight over a conventional lead-acid battery.